Kinetic Optimization for VHF® S5/K5.
Titanium matrix formulated for high-speed wet milling. Reduces thermal build-up and prevents 'Galling' (Edge Build-Up).
STRATEGY NOTE: ValidTi discs are calibrated for standard VHF titanium strategies. No custom RPM reduction required.
Premature Tool Failure
In high-dynamic milling (VHF S5), heat concentrates at the tool tip. Standard titanium becomes 'sticky', welding to the flute and snapping the tool. ValidTi's Triple-Melt process eliminates segregated impurities, ensuring clean chip formation that carries heat away from the tool.
Fig 1. Thermal Evacuation via Chip Morphology: Comparative analysis of swarf produced at 18,000 RPM / 0.05mm Chip Load.
Machinability Index
| Parameter | ValidTi Value | Standard Ti64 |
|---|---|---|
| Vickers Hardness | 310-330 HV10 | 340+ HV10 (Hard) |
| Elongation | 12-15% | >10% |
| Microstructure | Alpha-Beta Equiaxed | Variable |
| Recom. Coolant | Water/Oil Emulsion | Required |
Form Factor Selection
Select system configuration for immediate compatibility verification.